The raw materials of masonry mortar mainly are cementitious materials, aggregates, admixtures and additives.   Cementitious Materials Cement is the main cementitious material of masonry mortar. Currently the most commonly used are ordinary Portland cement, slag cement and etc., but slag cement is easy for bleeding, it should be kept in mind during use. Since.. read more →

The density of building mortar refers to the mass density of a certain proportion of uniformly mixed and stirred cementitious materials, sand and water. As for the component materials of mortar, their respective density is as follows: the apparent density of lime putty (1350kg/m³) > the bulk density of cement (1280kg/m³) > density of water.. read more →

The selection principle of ready-mixed mortar is that the use of wet-mixed or dry-mixed masonry mortar is determined by the situation of project and surrounding suppliers of ready-mixed mortar. If wet-mixed masonry mortar is selected for use, then the consistency and water retention of wet-mixed mortar should be determined by the types of block materials;.. read more →

First, masonry mortar is required to have good operability, including liquidity, cohesion and thixotropy. The mortar with good operability can easily form a uniform thin layer on the surface of rough block materials, and can be tightly bonded with the bottom surface. The use of mortar with good operability can not only facilitate the construction.. read more →

The traditional method of pasting tiles or stone is to adopt the on-site preparation, mixing cement, sand, 108 glue and water according to a certain proportion and then pasting. Since the water retention of mortar of this kind is low, tiles should be soaked and wetted in water beforehand, and then put mortar onto the.. read more →