Corona virus can be killed at 75% concentration of alcohol. Using alcohol hand sanitizer to clean hands can help to protect health and block the spread of the virus. There is a large demand of hand sanitizers globally, which has caused the raw material- Carbomer 940 continues to be out of stock and the prices soared. To cope with the shortage of Carbomer, HPMC was introduced to be.. read more →

Finished 50MT HPMC production. It is used in Dry-mixed mortar. read more →

basic concepts of cellulose ether In dry mortar, the addition of cellulose ether is very low, but it can significantly improve the performance of wet mortar, which is a major additive that affects the performance of mortar construction. The cellulose ether is mainly made of natural fiber, and is processed by alkali dissolution, graft reaction(etherification),.. read more →

Hydroxypropyl Methylcellulose is a non-ionic cellulose ether made through a series of chemical processes, with the natural polymer cellulose as the raw material. It is odorless, tasteless and non-toxic white powder. In cold water, it swells into a clear or slightly turbid colloidal solution. Hydroxypropyl Methylcellulose and Methylcellulose can be used in building materials, coating.. read more →

Differences between HPS and HPMC   HPS (short for hydroxypropyl starch ether) is unfamiliar to many people, and thought to be a little different from common starch, but that’s not the case. HPS has a very small amount used in mortar products, and a very low addition amount enables to achieve very good quality effects… read more →

There are many classifications of Hydroxypropylmethylcellulose. According to its uses, Sidley Chemical Co.,Ltd classifies HPMC into two categories, instant soluble and slowly soluble. Slowly soluble HPMC, also known as hot-water soluble HPMC, is also a kind of great used cellulose ether in dry-mixed mortar.   The differences and characteristics between HPMC and common HPMC ethers.. read more →

The density of building mortar refers to the mass density of a certain proportion of uniformly mixed and stirred cementitious materials, sand and water. As for the component materials of mortar, their respective density is as follows: the apparent density of lime putty (1350kg/m³) > the bulk density of cement (1280kg/m³) > density of water.. read more →

The material composition of ceramic tile adhesive mortar generally includes: ①Cement: inorganic cementing material; ②Redispersible latex powder: enhancing the bonding strength for all substrates (especially non-porous substrates and large-size tiles; or pasted on the smooth surface and unstable substrates), increasing the tensile strength, reducing the elastic modulus, increasing the water retention, improving the workability, and.. read more →

The building gypsum is the main raw material that guarantees the bond strength of adhesive plaster, and should meet the requirements of national standard GB / T 9776-2008.   As for the setting time of building gypsum, the standard requires that the initial setting be greater than 6min and that the final setting be less.. read more →

The cellulose ether can be used as the water-retaining agent. The water retention effects of cellulose ether can prevent the substrate from absorbing moisture too much and too fast, and can prevent the evaporation of water, in order to ensure sufficient water during hydration of cement. Generally speaking, the water-holding capacity of cement slurry will.. read more →